2 facts about electromagnetism

Comedians like to joke that the reason we haven’t been visited by intelligent life from elsewhere in the universe is that aliens have been monitoring earth’s broadcasts of intellectually embarrassing tv programs, like gilligan’s island, fear factor, the jersey shore, and the jerry springer showand so consider us far too primitive to merit a visit. let’s check the assertion that aliens could have been receiving them. tv programs are broadcast at a frequency of about 100mhz with about 100kw of total power in 30frames per second, which emanatesroughly uniformly in all directions. assume that interstellar space transmits these broadcasts without attenuation. no matter how smart they are, aliens would require at least one photon per frame to interpret our signals. findthe number of photons per unit time per unit area reaching a receiver on a possible planet in the nearest star system, which is about 4 light-years away (a light-year is the distance light travels in a year). if aliens aimed a receiver or detector directly at earth, how big (in diameter) would it have to be to receive a photon per frame

Imagine that the rightward current flows in the rod for a short time. as a result, what will the net charge on the right and left ends of the rod become? left end negative and right end positive left end negative and right end negative left end negative and right end nearly neutral left end nearly neutral and right end positive both ends nearly neutral

Atension test was conducted on a specimen of aisi 1020 hot-rolled steel having an initialdiameter of 9.11 mm. representative test data are given in table1in the form of force and engineering strain. for strain the extensometer gage length was li= 50.8 mm. in addition, minimumdiameters were measuredmanually with a micrometer in the necked region at several points during the test. after fracture, thebroken halves were reassembled, and the following measurements were made: (1) marks originally 25.4 mm apart and on opposite sides of the necked regionwere 38.6 mm apart due to the lengthwise stretching in the specimen; (2) similar marks originally 50.8 mm apart were 70.9 mmapart; (3) the final minimum diameter in the necked region was 5.28 mma) determine the following material properties: elastic modulus, 0.2% offset yield strength, ultimate tensile strength, percent elongation, and percent reduction in area. b) assume that the test was interrupted upon reaching a strain u = 0.007, and the specimen unloaded to zero force. estimate the elastic strain recovered and the plastic strain remaining. also, what would the new length of the original 50.8 mm gage section. hint: might save time/effort to use excel, mathcad, matlab, etc. to solve part a)table1 data and analysis for a tension test on aisi 1020 hot-rolled steeltest dataforce (p, kn)1. 0.002. 6.673. 13.344. 19.135. 17.796. 17.217. 17.538. 17.449. 17.2110. 20.7711. 24.2512. 25.7113. 25.7514. 25.0415. 23.4916. 21.3517. 18.9018. 17.39engr. strain (ε)1. 02. 0.00053. 0.00104. 0.00155. 0.00236. 0.00317. 0.00508. 0.00709. 0.010010. 0.049011. 0.125012. 0.218013. 0.234014. 0.306015. 0.330016. 0.348017. 0.360018. 03660diameter (d, mm)1. 9.112. 9.113. 9.114. 9.115. 9.116. 9.117. 9.118. 9.119. 9.1110. 8.8911. 8.8912. 8.2613. 8.2614. 7.6215. 6.9916. 6.3517. 5.7218. 5.28