A car with a mass of 1.1 x10 to the third power killograms hits a stationary truck with a mass of 2.3kg x10 to the third power from the rear ean. The initial velocity of the car is +22.0 meters/second. After the collision the velocity of the car is -11.0 meters/second. What is the velocity of the truck after this elastic collision.

Question 1 (5 pts): what is the maximum distance for which you can you resolve the two individual headlights of an on-coming truck as two separate lights rather than one if the headlights are separated by 2.00 m and your eye has a diameter of 1.00 centimeter? assume a wavelength of 500 nm.

An insulated thermos contains 148 g of water at 72.7 ˚c. you put in a 11.7 g ice cube at 0.00 ˚c to form a system of ice + original water. the specific heat of liquid water is 4190 j/kg•k; and the heat of fusion of water is 333 kj/kg. what is the net entropy change of the system from then until the system reaches the final (equilibrium) temperature?

Conventional hot-water heaters consist of a tank of water maintained at a fixed temperature. the hot water is to be used when needed. the drawback is that energy is wasted because the tank loses heat when it is not in use, and you can run out of hot water if you use too much. some utility companies are encouraging the use of on-demand water heaters (also known as flash heaters), which consist of heating units to heat the water as you use it. no water tank is involved, so no heat is wasted. a typical household shower flow rate is 2.50 gal/min (9.46 l/min ) with the tap water being heated from 51.0 ˚f (10.6 ˚c) to 120 ˚f (48.9 ˚c) by the on-demand heater.what rate of heat input (either electrical of from gas) is required to operate such a unit, assuming that all the heat goes into the water?