To measure the heat capacity of an object, all you usually have to do is put it in thermal contact with another object whose heat capacity you know. As an example, suppose that a chunk of metal is immersed in boiling water (100°C), then is quickly transferred into a Styrofoam cup containing 250 g of water at 20°C. After a minute or so, the temperature of the contents of the cup is 24°C. Assume that during this time no significant energy is transferred between the contents of the cup and the surroundings. The heat capacity of the cup itself is negligible. What is the heat capacity of this chunk of metal?

Calculate the first and second velocities of the car with four washers attached to the pulley, using the formulas v1 = 0.25 m / t1 , and v2 = 0.25 m / (t2 – t1) where t1 and t2 are the average times the car took to reach the 0.25 and the 0.50 meter marks. record these velocities, to two decimal places, in table e.

Asimple electrochemical cell contains two electrodes.

I) a gas contained within a piston-cylinder assembly undergoes two processes, a and b, between the same end states, 1 and 2, where p1 = 10 bar, v1 = 0.1 m3 , u1 = 400 kj and p2 = 1 bar, v2 = 1.0 m3 , u2 = 200 kj: ' process a: process from 1 to 2 during which the pressure-volume relation is pv = constant. ' process b: constant-volume process from state 1 to a pressure of 2 bar, followed by a linear pressure-volume process to state 2. kinetic and potential energy effects can be ignored. for each of the processes a and b, a) sketch the process on a p-v diagram. b) evaluate the work, in kj. c) evaluate the heat transfer, in kj.(ans : qb,12 = -65.0 kj)