Physics, 24.05.2021 08:00 maxellodom5
1.4 (A). Two fork-end pieces are to be joined together by a single steel pin of 25 mm diameter and they are
required to transmit 50 kN. Determine the minimum cross-sectional area of material required in one branch of either
fork if the stress in the fork material is not to exceed 180 MN/m 2. What will be the maximum shear stress in the pin?
[1.39 x 10 -4 mZ; 50.9 MN/m2.]
Answers: 3
Another question on Physics
Physics, 22.06.2019 12:00
For the car in the picture ,in which direction is the normal force? -into the screen -down -out of the screen -up
Answers: 2
Physics, 22.06.2019 12:10
Ablock having mass m slides down an inclined plane. the force of friction between the block and the inclined plane is f, the block's weight is m g, and the normal force is n. (a) draw a free – body force diagram showing the forces acting on the block. (b) write down all relevant newton’s equations for a given situation.
Answers: 1
Physics, 22.06.2019 13:40
Consider a double atwood machine constructed as follows: a mass 4m is suspended from a string that passes over a massless pulley on frictionless bearings. the other end of this string supports a second similar pulley, over which passes a second string supporting a mass of 3m at one end and m at the other. using two suitable generalized coordinates, set up the lagrangian and use the lagrange equations to find the acceleration of the mass 4m when the system is released. explain why the top pulley rotates even though it carries equal weights on each side.
Answers: 2
You know the right answer?
1.4 (A). Two fork-end pieces are to be joined together by a single steel pin of 25 mm diameter and t...
Questions
Chemistry, 20.04.2020 22:02
Mathematics, 20.04.2020 22:02
English, 20.04.2020 22:03
Mathematics, 20.04.2020 22:03
Mathematics, 20.04.2020 22:03
Mathematics, 20.04.2020 22:03
