subject
Physics, 31.05.2021 15:20 Scotty78

Use the bisection method and Matlab to determine the drag coefficient needed so that a 95-kg bungee jumper has a velocity of 46 m/s after 9 s of free fall. Note: The acceleration of gravity is 9.81 m/s2. Start with initial guesses of x = 0.2 and xu = 0.5 and iterate until the approximate relative error falls below 0.1%.

ansver
Answers: 2

Another question on Physics

question
Physics, 21.06.2019 14:30
Does any one know what real love is and would anyone be willing to share it with me?
Answers: 2
question
Physics, 22.06.2019 10:50
Asheet of steel 1.5 mm thick has nitrogen atmospheres on both sides at 1200oc and is permitted to achieve a steady-state diffusion condition. the diffusion coefficient for nitrogen in steel at this temperature is 6 x 10- 11 m2 /s, and the diffusion flux is found to be 1.2 x 10-7 kg/m2 -s. also, it is known that the concentration of nitrogen in the steel at the high-pressure surface is 4 kg/m3 . how far into the sheet from this high-pressure side will the concentration be 2.0 kg/m3 ? assume a linear concentration profile.
Answers: 3
question
Physics, 22.06.2019 13:30
Which is not an example of how an object gains elastic potential energy by stretching? a. jumping on a pogo stick b. pulling on a rubber band c. jumping on a trampoline
Answers: 1
question
Physics, 22.06.2019 18:00
Acid precipitation chemically weathering a 5.0-kg limestone rock . which coukd be the result ?
Answers: 1
You know the right answer?
Use the bisection method and Matlab to determine the drag coefficient needed so that a 95-kg bungee...
Questions
Questions on the website: 13722361