Physics, 13.06.2021 02:50 kana13

A rocket at fired straight up from rest with a net upward acceleration of 20 m/s2 starting from the ground. After 4.0 s, the thrusters fail and the rocket continues to coast upward with insignificant air resistance. (a) What is the maximum height reached by the rocket

Answers: 2

Show answers

Another question on Physics

Physics, 21.06.2019 19:00

1) sections 1, 2, and 10 are significant primarily because they suggest the likelihood that a) widow wycherly is actually the woman in the full-length portrait. b) dr. heidegger wants to include his guests in an experiment with the water. c) dr. heidegger plans to drink some of the water from the vase and needs witnesses. d) the guests will be asked to witness dr. heidegger's transformation when he drinks the water.

Answers: 1

Answer

Physics, 22.06.2019 05:10

Total solidification times of three casting geometries are to be compared: a sphere, a cylinder, in which the length-to-diameter ration - 1.0, and a cube. volume = 1000 cm^3 for all three shhapes, and the same casting alloy is used. a) determine the solidification times of each geometry b) based on the results of part (a), which geometric element would make the best riser? c) if the mold constant = 3.5 min/cm^2 in chvorinov's rule, compute the total solidification time for each casting.

Answers: 3

Answer

Physics, 22.06.2019 06:40

Alinearly polarized electromagnetic wave has an average intensity of 196 w/m^2. this wave is directed towards two ideal polarizers (in real polarizers, transmission is also effected by reflection and absorption). polarizer a is oriented with its transmission axis at an angle of θ_1=20.8∘ with the incident electric field. polarizer b has its axis at an angle of θ_2=63.0∘ with the incident electric field. what is the average intensity of the wave after it passes through polarizer a? what is the average intensity of the wave after it passes through polarizer b? suppose that the two polarizers a and b are interchanged. what would the average intensity be after passing through both polarizers?

Answers: 2

Answer

Physics, 22.06.2019 12:00

You have a resistor and a capacitor of unknown values. first, you charge the capacitor and discharge it through the resistor. by monitoring the capacitor voltage on an oscilloscope, you see that the voltage decays to half its initial value in 2.70 miss . you then use the resistor and capacitor to make a low-pass filter. what is the crossover frequency fc?

Answers: 2

Answer

You know the right answer?

A rocket at fired straight up from rest with a net upward acceleration of 20 m/s2 starting from the...

Questions