Physics, 14.06.2021 16:00 DangerDash
If you pull with your lower leg such that you exert a 90 N force on the cord attached to your ankle, determine the magnitude of the tension force of your hamstring on your leg and the compression force at the knee joint.
Answers: 2
Physics, 22.06.2019 00:40
The rigid beam is supported by the three suspender bars. bars ab and ef are made of aluminum and bar cd is made of steel. if each bar has a cross-sectional area of 450 mm2, determine the maximum value of p if the allowable stress is (σallow)st = 200 mpa for the steel and ( σallow)al = 150 mpa for the aluminum. est = 200 gpa and eal = 70 gpa.
Answers: 1
Physics, 22.06.2019 09:00
What is a possible result of higher air temperature caused by global warming
Answers: 1
Physics, 22.06.2019 10:50
Asheet of steel 1.5 mm thick has nitrogen atmospheres on both sides at 1200oc and is permitted to achieve a steady-state diffusion condition. the diffusion coefficient for nitrogen in steel at this temperature is 6 x 10- 11 m2 /s, and the diffusion flux is found to be 1.2 x 10-7 kg/m2 -s. also, it is known that the concentration of nitrogen in the steel at the high-pressure surface is 4 kg/m3 . how far into the sheet from this high-pressure side will the concentration be 2.0 kg/m3 ? assume a linear concentration profile.
Answers: 3
If you pull with your lower leg such that you exert a 90 N force on the cord attached to your ankle,...
Mathematics, 19.04.2021 20:40
English, 19.04.2021 20:40
Mathematics, 19.04.2021 20:40
Mathematics, 19.04.2021 20:40
English, 19.04.2021 20:40
Mathematics, 19.04.2021 20:40
Mathematics, 19.04.2021 20:40
Mathematics, 19.04.2021 20:40