Physics, 30.06.2021 17:30 ibahadurali786oz4gxs

Part B Tape a meter stick to the side of the table. Make sure the zero end is on the floor. Carry out the experiment using the four
drop heights you chose in task 1, part D. (You may want to have an adult drop the ball while you watch how high it
bounces.) Perform three trials for each drop height, and record the data in the table. (You may choose
video the
bounces and watch the video in slow motion to improve your data collection.) Finally, average e the bounce height
measurements to get a final reading. Round the average bounce heights to the nearest whole number.
В І у хх,
Font Sizes
A-
Drop Height
First Drop Bounce Height
Second Drop Bounce Height
Third Drop Bounce Height
Average Bounce Height
Characters used: 110 / 15000
100e

Part B

Tape a meter stick to the side of the table. Make sure the zero end is on the floor. Carry

Answers: 3

Show answers

Another question on Physics

Physics, 22.06.2019 08:30

How is sound energy produced a. vibrating objects b. objects being heated c. temperature differences d. stationary objects

Answers: 2

Answer

Physics, 22.06.2019 15:30

At 20∘c, the hole in an aluminum ring is 2.800 cm in diameter. you need to slip this ring over a steel shaft that has a room-temperature diameter of 2.804 cm . 1. to what common temperature should the ring and the shaft be heated so that the ring will just fit onto the shaft? coefficients of linear thermal expansion of steel and aluminum are 12×10−6 k−1 and23×10−6 k−1 respectively.

Answers: 1

Answer

Physics, 22.06.2019 19:30

Contains chemical energy. a. heat b. light c. natural gas

Answers: 2

Answer

Physics, 22.06.2019 21:50

Ajoint produces movement when its angle decreases. which type of movement is it?

Answers: 1

Answer

You know the right answer?

Part B Tape a meter stick to the side of the table. Make sure the zero end is on the floor. Carry o...