In the inclined plane shown in the diagram, the distance between A and C is 16m and between B and C is 5 m. If its mechanical advantage is 2.5, calculate the distance: i. effort applied to lift the load. ii. velocity ratio iii. efficiency iv. output work V. input work​

Athin plate moves between two parallel, horizontal, stationary flat surfaces at a constant velocity of v = 7.5 m/s. the two stationary surfaces are spaced 4 cm apart, and the medium between them is filled with oil whose viscosity is 0.9 n·s/m2. the part of the plate immersed in oil at any given time is 2 m long and 0.5 m wide. if the plate moves through the mid-plane between the surfaces, determine the force required to maintain this motion. what would your response be if the plate was 1 cm from the bottom surface (h2) and 3 cm from the top surface (h1)? if the plate moves through the mid-plane between the surfaces, the force required to maintain the motion will be n. if the plate was 1 cm from the bottom surface (h2) and 3 cm from the top (h1) surface, the force required to maintain the motion would be n.

On a day when the barometer reads 75.23 cm, a reaction vessel holds 250 ml of ideal gas at 20 celsius. an oil manometer ( ρ= 810 kg/m^3) reads the pressure in the vessel to be 41 cm of oil and below atmospheric pressure. what volume will the gas occupy under s.t.p.?

7. see worksheet 1 for values of variables x1, x2 and x3 and answer the following questions: a. for each variable find the mean, median, coefficient of skewness, range and population standard deviation. b. compared to variable x1, how are the mean and median affected by extreme values (outliers) seen in x2 and x3. c. is the median or mean the better measure of location for x2 and x3? explain. d. explain the differences in the magnitudes of the skewness coefficients for the three variables. e. what is the relationship between the range and standard deviation looking across the three variables?