The escalator steps move with a constant speed of 0.6 m>s. If the steps are 125 mm high and 250 mm in length, determine the power of a motor needed to lift an average mass of 150 kg per step. There are 32 steps.

The motor m applies a time-varying force of f (200 t) n, where t is in seconds. box b with mass 200 kg starts from rest, and the coefficients of kinetic and static friction are 0.2 and us 0.3 the acceleration due to gravity is g 9.8 m/s2 b 300 a) find the time ' when the box starts to move. b) calculate the speed of the crate at 3 s c) calculate the power delivered by the motor at t 3 s

5submission this assignment is worth 20 points total. you are required to submit the following by next lab: 1. (3 points) determine the equation for the output angular velocity ω2 = θ˙ 2 as a function of θ1, ω1 = θ˙ 1 and α. you must show all your work to receive credit. 2. (2 points) use the result of problem#1 to plot ω2 over 0 ≤ θ1 ≤ 360deg with ω1 = 360deg/sec. do this for α = {10,30}deg. show the results on the same plot and properly label the axes, title, legend. for this you can use matlab or ms excel. 3. (3 points) determine the equation for the output angular acceleration ω˙ 2 and create a plot similar to the one in problem#2. 4. (10 points) submit plots of the results (ω2 and ω˙ 2) obtained from creo/mechanism and compare them to results of problem#2 and problem#3. note that you should do these comparisons for the two cases with α = {10,30}deg. 5. (2 points) provide a brief explanation of the results. did they match? what are the implications as misalignment angle increases?

Clothes dryer uses about 7 amps of current from a 240 volt line. how much power does it use?