Physics, 14.07.2021 05:00 LilErvin

Can the magnitude of a vector ever (a) be equal to one of its components, or (b) be less than one of its components? 9. Can a particle with constant speed be accelerating? What if it has constant velocity?

Answers: 1

Show answers

Another question on Physics

Physics, 22.06.2019 13:50

Most of the volume of an atom is occupied by the

Answers: 1

Answer

Physics, 22.06.2019 16:30

The air in an automobile tire with a volume of 2.60 ft3 is at 70°f and 21 psig. determine the amount of air that must be added to raise the pressure to the recommended value of 30 psig. assume the atmospheric pressure to be 14.6 psia and the temperature and the volume to remain constant. the gas constant of air is ru = 53.34ft⋅lbflbm⋅r(1 psia144 lbf/ft2) = 0.3704 psia⋅ft3lbm⋅r the amount of air that must be added to raise the pressure is lbm

Answers: 3

Answer

Physics, 22.06.2019 19:30

Amass m = 74 kg slides on a frictionless track that has a drop, followed by a loop-the-loop with radius r = 18.4 m and finally a flat straight section at the same height as the center of the loop (18.4 m off the ground). since the mass would not make it around the loop if released from the height of the top of the loop (do you know why? ) it must be released above the top of the loop-the-loop height. (assume the mass never leaves the smooth track at any point on its path.) 1. what is the minimum speed the block must have at the top of the loop to make it around the loop-the-loop without leaving the track? 2. what height above the ground must the mass begin to make it around the loop-the-loop? 3. if the mass has just enough speed to make it around the loop without leaving the track, what will its speed be at the bottom of the loop? 4. if the mass has just enough speed to make it around the loop without leaving the track, what is its speed at the final flat level (18.4 m off the ground)? 5. now a spring with spring constant k = 15600 n/m is used on the final flat surface to stop the mass. how far does the spring compress?

Answers: 3

Answer

Physics, 22.06.2019 20:30

We will use a video to study faraday’s law of electromagnetic induction by analyzing the induction that occurs due a coil of copper wire sliding along an air track that passes through an external magnetic field. specifically, we will: examine some of the main principles behind faraday’s law. apply lenz’s law to determine the direction of the induced emf. take measurements of the induced emf from the voltmeter as the coil passes into and out of the external magnetic field. use the horizontal scale provided to determine the speed of the coil. calculate the magnetic field induced in the coil as it passes into and out of the external magnetic field.

Answers: 2

Answer

You know the right answer?

Can the magnitude of a vector ever (a) be equal to one of its components, or (b) be less than one of...

Questions