subject
Physics, 27.07.2021 14:00 helppppp3548

11. A load of 20N on a wire of cross-sectional area 8 x 10"m”, produces an extension of 104m. m. Calculate Young's Modulus for the material of the wire if its length is 3m. 4. 7.0 x 10''Nm2 B. 7.5 x 10''Nm2 C. 8.5 x 10''Nm2 D. 9.0 x 10''Nm-2 y 10l-2 YA​

ansver
Answers: 2

Another question on Physics

question
Physics, 22.06.2019 10:00
During which interval are the persons represented by the graph not moving? a) 0 to 0.5 hrs b) 1.5 to 2 hrs c) 2 to 2.5 hrs d) 4.5 to 5 hrs
Answers: 1
question
Physics, 22.06.2019 19:00
Abatter hits a 0.140-kg baseball that was approaching him at 30 m/s and, as a result, the ball leaves the bat at 40 m/s in the reverse of its original direction. the ball remains in contact with the bat for 2.0 ms. what is the magnitude of the average force exerted by the bat on the ball?
Answers: 1
question
Physics, 22.06.2019 20:40
Ablock of mass m = 2.5 kg is attached to a spring with spring constant k = 740 n/m. it is initially at rest on an inclined plane that is at an angle of theta= 26 with respect to the horizontal, and the coefficient of kinetic friction between the block and the plane is uk = 0.17. in the initial position, where the spring is compressed by a distance of d = 0.16 m, the mass is at its lowest position and the spring is compressed the maximum amount. take the initial gravitational energy of the block as zero. the block's initial mechanical energy is 9.472 j.b. if the spring pushes the block up the incline, what distance l in meters will the block travel before coming to rest? the spring remains attached to both the block and the fixed wall throughout its motion.
Answers: 3
question
Physics, 22.06.2019 20:50
An ideal otto cycle has a compression ratio of 8. at the beginning of the compression process, air is at 95 kpa and 27°c, and 750 kj/kg of heat is transferred to air during the constant-volume heat-addition process. assuming constant specific heats at room temperature, determine (a) the pressure and temperature at the end of the heat-addition process, (b) the net work output, (c) the thermal efficiency, and (d) the mean effective pressure for the cycle. (4390 kpa, 1730 k; 423 kj/kg; 56.4%; 534 kpa)
Answers: 1
You know the right answer?
11. A load of 20N on a wire of cross-sectional area 8 x 10"m”, produces an extension of 104m. m. Cal...
Questions
question
English, 13.01.2021 19:50
question
Mathematics, 13.01.2021 19:50
Questions on the website: 13722367