The radius of the wheel is 40cm and the radius of the axle is 0.1 metre in a wheel and

axle. If a load of 1200N is overcome up to 4m by applying

an effort of 400N, calculate:

i. mechanical advantage ii. velocity ratio iii. efficiency

iv. output work v. input work
​

Ithink it is letter b, i may be wrong but i think that is the answer

Ohm's law tells you that i = v/r where v is equivalent voltage and r is equivalent resistance of the circuit
since all circuits have the same voltage, your question is really asking which circuit has the lowest total resistance, since the lower the resistance, the higher the current
circuit a has a resistance of 5 ohms; circuit c is in series so has a resistance of 10 ohms; circuit b is in parallel and therefore has a resistance of 2.5 ohms (review your notes on adding resistances in parallel and series); therefore b has the highest current

If the heat engine is a perfect carnot cycle engine, thenefficiency = (t2-t1)/t2   where t1=temperature of cold reservoir ( ° k) = 135            t2=temperature of hot reservoir ( ° k)   = 325thereforeefficiency = (t2-t1)/t2 = (325-135)/325 = 0.5846 = 58%  note: this is the theoretical maximum efficiency of a perfect heat engine.   real-life engines do not achieve this value.