A nozzle with a radius of 0.250 cm is attached to a garden hose with a radius of 0.700 cm. The velocity of the water in the hose is 1.90 m/s and the velocity of the water in the nozzle is 14.9 m/s Required:
a. Calculate the maximum height to which water could be squirted if it emerges from the nozzle.
b. Calculate the maximum height to which water could be squirted if it emerges with the nozzle removed, assuming the same flow rate.

this a false

explanation:

option number c is the right answer.

speed of light in vacuum is 300,000 km/s

speed of light in other mediums is given by the expression v = c/n, where c is the speed of light in vacuum and n is the refractive index of medium.

for the first medium v = 200,000 km/s

  so, refractive index of medium = 300000/200000 = 1.5

    1.5 refractive index is usually for glass. so first medium is glass.

for the second medium v = 250,00 km/s

so, refractive index of medium = 300000/250000 = 1.2

    1.2 refractive index is usually for water. so second medium is water.

for the third medium v = 0 km/s

so, refractive index of medium = 300000/0 = ∞

    ∞ refractive index is usually for opaque mediums. so third medium is opaque medium.

the design of a ski jumping suit involves a trade-off between giving the skiers lift to get higher jumps and ensuring the skier does not face a lot of drag before the jump itself. an expansive suit may to lift the skier higher, but at the same time, it will also increase the air resistance. higher air resistance as the skier goes down the slope limits the speed of the jump. a big suit also increases the risk of losing balance or control, especially if there's a strong gust of wind. while technologically enhanced suits a lot, clothing is not the only factor in a ski jumper’s success. gathering speed while skiing down the slope, ensuring good speed on the ramp, and maintaining good body posture and form in the air all contribute to a ski jumper's success.