3. Four identical cells cach ofe. m.f. 1.5 volts with internal resistance are connected to form a banery of 6.0V. The battery is then joined in series with an ammeter of negligible resistance and fixed external resistance of 12 ohms. The ammeter then reads 0.3A. (a) Draw diagram of the circuit. (b) Calculate () the internal resistance of the battery, and (1) the value of the resistor which must be joined in parallel with the 12-ohm resistor to increase the ammeter reading to 0.5A​

Identify the amplitude on the diagram and give the correct description. question 3 options: a because amplitude is the distance from wave crest to wave crest. b because the wavelength shows amplitude. c because amplitude is the distance between a crest (or trough) and rest. d because wavelength show amplitude. (brainiest if you get it right! ) ~kayla

Glass is transparent to visibile light under normal conditions; however, at extremely high intensities, glass will absorb most of the light incident upon it. this works through a process known as multiphoton absorption. in this process, several photons are absorbed at the same time. if very intense light whose photons carry 2ev of energy is shined onto a material with a band gap of 4ev, that light can be absorbed through two-photon absorption, because two photons have the right amount of energy to bridge the band gap. what is the minimum number of photons of 800-nm light that are needed to equal or exceed the band gap of fused silica glass

Unpolarized light of intensity i_0=750w/m^2 is incident upon two polarizers. after passing through both polarizers the intensity is i_2=280w/m^2. (a) what is the intensity of the light after it passes through the first polarizer in w/m^2? (b) write an equation for the angle between the polarizers in terms of the initial (i_0) and final (i_2) intensities. (c) find the angle between the polarizers in degrees.