subject
Physics, 02.09.2021 19:30 QueenLife4869

The two speakers at S1 and S2 are adjusted so that the observer at O hears an intensity of 6 W/m2 when either S1 or S2 is sounded alone. The speakers are driven in phase (at the speakers) with various frequencies of sound. The distance between the two speakers is L = 4 m and distance between S1 and the observer is also L = 4 m. Assume that the speed of sound is 335 m/s. Suppose both speakers are driven a frequency f = 30 Hz. 1. What is I, the intensity of the combined wave at the observer?
2. What is Imax, the maximum possible intensity of the combined waves at the observer at O, assuming the observer would still hear the intensity of 6 W/m2 when either S1 or S2 is sounded alone?
3. What is fmin,1, the lowest frequency that will produce the maximum intensity (Imax) at the observer, assuming the observer would still hear the intensity of 6 W/m2 when either S1 or S2 is sounded alone?
4. What is fmin,2, the lowest frequency that will produce the minimum intensity at the observer, assuming the observer would still hear the intensity of 6 W/m2 when either S1 or S2 is sounded alone?
5. What is fmin,3, the lowest frequency that will produce an intensity I3 = Imax/4 at the observer, assuming the observer would still hear the intensity of 6 W/m2 when either S1 or S2 is sounded alone?

ansver
Answers: 1

Another question on Physics

question
Physics, 22.06.2019 00:40
Electroplating is a way to coat a complex metal object with a very thin (and hence inexpensive) layer of a precious metal, such as silver or gold. in essence the metal object is made the cathode of an electrolytic cell in which the precious metal cations are dissolved in aqueous solution. suppose a current of 480.ma is passed through an electroplating cell with an aqueous solution of agno3 in the cathode compartment for 46.0 seconds. calculate the mass of pure silver deposited on a metal object made into the cathode of the cell. round your answer to 3 significant digits. also, be sure your answer contains a unit symbol. ×10μ
Answers: 3
question
Physics, 22.06.2019 07:30
Boxing gloves are padded to lessen the force of a blow. (a) calculate the force exerted by a boxing glove on an opponent’s face, if the glove and face compress 7.50 cm during a blow in which the 7.00-kg arm and glove are brought to rest from an initial speed of 10.0 m/s. (b) calculate the force exerted by an identical blow in the gory old days when no gloves were used and the knuckles and face would compress only 2.00 cm. (c) discuss the magnitude of the force with glove on. does it seem high enough to cause damage even though it is lower than the force with no glove?
Answers: 1
question
Physics, 22.06.2019 10:20
What determines the amount of inertia an object has
Answers: 2
question
Physics, 22.06.2019 16:50
Acommercial refrigerator with refrigerant-134a as the working fluid is used to keep the refrigerated space at -35°c by rejecting waste heat to cooling water that enters the condenser at 18°c at a rate of 0.25 kg/s and leaves at 26°c. the refrigerant enters the condenser at 1.2 mpa and 50°c. if the compressor consumes 3.3 kw of power, determine (a) the mass flow rate of the refrigerant, (b) the refrigeration load, (c) the cop, and (d) the minimum power input to the compressor for the same refrigeration load.
Answers: 2
You know the right answer?
The two speakers at S1 and S2 are adjusted so that the observer at O hears an intensity of 6 W/m2 wh...
Questions
question
Mathematics, 19.12.2019 22:31
Questions on the website: 13722362