Physics, 10.09.2021 04:20 Jay23456677888

Sadadasdsadiufygpoiugsf

Answers: 3

Show answers

Answers

Answer from: Quest

pythagoras' theorem

square root (-5^2+9^2)

square root (25+81)

square root (106)

angle is tan^-1(9/5)

neg x, pos y

Answer from: Quest

Molybdeum(mo)orruthenium (ru)actually, elements with similar chemical properties as technetium would bemn, re, and bh. this is because elements in the same group/family (column) have similar chemical properties. elements in the same period (row) have the same number of energy levels (or shells).

Answer from: Quest

Ohm's law tells you that i = v/r where v is equivalent voltage and r is equivalent resistance of the circuit
since all circuits have the same voltage, your question is really asking which circuit has the lowest total resistance, since the lower the resistance, the higher the current
circuit a has a resistance of 5 ohms; circuit c is in series so has a resistance of 10 ohms; circuit b is in parallel and therefore has a resistance of 2.5 ohms (review your notes on adding resistances in parallel and series); therefore b has the highest current

Answer from: Quest

Answer: a charge of -1.0 × 10⁻⁴ c must be placed at x = 26 m.the sign of the charge will be the same sign as the -4.0 µc charge.======electricstatic force between two point charges is given by $f = \dfrac{kq_1q_2}{r^2}$ where k is coulomb's constant, 8.99×10⁹ n·m²/c², q₁ and q₂ are the point charges, and r is the distance between the two point charges.assign positive to q₁let q₁ = 6.0 µc, q₂ = -4.0 µc, q₀ represent the charge at the origin, and q₃ represent this new charge to place.the charge at the origin q₀ would experience the following force f₀₁ from q₁, with r = 6.0 m (note that 1 µc = 10⁻⁶ c) $f_{01} = \dfrac{kq_0q_1}{(\text{6.0 m})^2}$ the force from q₂ $f_{02} = \dfrac{kq_0q_2}{(\text{15 m})^2}$ the force from q₃ $f_{03} = \dfrac{kq_0q_1}{(\text{26 m})^2}$ the net force on the origin charge, q₀, has to be zero for no electrostatic forcehaving an equation where k and q₀ can be divided out of the equation will allow us to solve for q₃ $\begin{aligned} f_{net} & = 0\\ f_{01} + f_{02} + f_{03} & = 0 \\ \dfrac{kq_0q_1}{(\text{6.0 m})^2} + \dfrac{kq_0q_2}{(\text{15 m})^2} + \dfrac{kq_0q_3}{(\text{26 m})^2} & = 0 \\ kq_0 \left( \dfrac{q_1}{(\text{6.0 m})^2} + \dfrac{q_2}{(\text{15 m})^2} + \dfrac{q_3}{(\text{26 m})^2}\right) & = 0 \\ \dfrac{q_1}{(\text{6.0 m})^2} + \dfrac{q_2}{(\text{15 m})^2} + \dfrac{q_3}{(\text{26 m})^2} & = 0 \end{aligned}$ isolating: $\begin{aligned} \dfrac{q_3}{(\text{26 m})^2} & = -\dfrac{q_1}{(\text{6.0 m})^2} - \dfrac{q_2}{(\text{15 m})^2} \\ q_3 & = -(\text{26 m})^2\left(\dfrac{q_1}{(\text{6.0 m})^2} + \dfrac{q_2}{(\text{15 m})^2}\right) \\ q_3 & = -(\text{26 m})^2\left(\dfrac{6.0\times10^{-6} \text{ c}}{(\text{6.0 m})^2} + \dfrac{-4.0\times10^{-6} \text{ c}}{(\text{15 m})^2}\right) \\ q_3 & = -1.0064888 \times 10^{-4}\text{ c} \\ q_3 & = -1.0\times 10^{-4}\text{ c} \end{aligned}$ a charge of -1.0 × 10⁻⁴ c must be placed at x = 26 m.the sign of the charge will be the same as the -4.0 µc charge

Another question on Physics

Physics, 22.06.2019 09:00

When a light bulb shines, it gives off light energy and energy. a. heat b. potential c. chemical d. electrical

Answers: 2

Answer

Physics, 22.06.2019 10:10

What is special about a dc circuit ?

Answers: 3

Answer

Physics, 22.06.2019 10:30

Astone weighing 1.5 kilograms is resting on a rock at a height of 20 meters above the ground. the stone rolls down 10 meters and comes to rest on a patch of moss. the gravitational potential energy of the stone on the moss is joules.

Answers: 1

Answer

Physics, 22.06.2019 14:30

Which of the following changes will increase the capacitance of a parallel-plate capacitor? (there could be more than one correct choice.) a) increase the charge on the plates b) decrease the poten5al between the plates c) increase the potential between the plates d) introduce a dielectric material between the plates e) decrease the separation between the plates

Answers: 3

Answer

You know the right answer?

Sadadasdsadiufygpoiugsf...

Questions