For a lever of 0.5 m length with a pivot in the centre, an object weighs 5N is seated 0.25 m left side of the pivot. a-How far must the other 10N object be seated from the right side of the pivot in order to balance the lever

1. consider the case in which air fills air shocks on a truck trailer. the pressure in the shocks is 2 mpa. the temperature is 300 k. the diameter of the shock piston is 10 cm and the initial length of the cylindrical cavity containing the compressed air is 40 cm. a. the truck is gradually loaded over a period of a day in a static setting. the temperature is held constant for the atmosphere and thus for the gas shock. calculate the compressibility of the air in the shock for this condition when the truck is initially being loaded. b. if the shocks were loaded in a dynamic setting by driving over bumps, what would be the compressibility? state your assumption. c. what is the initial load on the shock if the shock is in an atmospheric 100 kpa? d. if the shock is compressed using the process described in part a, and the air shock compressed air cavity length decreases to 20 cm, what is the additional load applied to the shock?

Um vetor representa um deslocamento cujo módulo é 20 m. se v faz um ângulo de 60 graus com a horizontal, qual é o valor das componentes horizontal e vertical deste vetor?

When the magnetic domains in a material can be aligned, but eventually drift out of alignment, the material is