WORTH 35 POINTS PLEASE AWNSER THEM IN AN HOUR U DONT HAVE TO TAKE AN HOUR AND THEY CAN BE BS AWNSERS. AS LONG AS THERE CORRECT I DONT CARE. I PUT UP ANOTHER ONE WORTH 65 POINTS ASWELL ITS THE SAME PAPER.

At 20∘c, the hole in an aluminum ring is 2.800 cm in diameter. you need to slip this ring over a steel shaft that has a room-temperature diameter of 2.804 cm . 1. to what common temperature should the ring and the shaft be heated so that the ring will just fit onto the shaft? coefficients of linear thermal expansion of steel and aluminum are 12×10−6 k−1 and23×10−6 k−1 respectively.

Calculate a pendulums frequency of oscillation (in hz) if the pendulum completes one cycle in 0.5s.

Awelder using a tank of volume 7.50×10^-2 m^3 fills it with oxygen (with a molar mass of 32.0 g/mol ) at a gauge pressure of 3.30×10^5 pa and temperature of 37.1 ∘c. the tank has a small leak, and in time some of the oxygen leaks out. on a day when the temperature is 23.1 ∘c, the gauge pressure of the oxygen in the tank is 2.00×10^5 pa . a) find the initial mass of oxygen. b) find the mass of oxygen that has leaked out.