Physics, 24.10.2021 18:20 maddietomlinson113

A skateboarder is trying to skate horizontally off a building and jump over a pool as shown! The pool is 20.0m wide and the roof of the building is 27.0m above where he will land. Neglect drag. How long will the skateboarder remain in the air?

With what initial speed (in given units) does the skateboarder need to barely clear the pool?

Would the skateboarder clear the pool if he skated off the building with an initial speed of 15mph?

A skateboarder is trying to skate horizontally off a building and jump over a pool as shown! The po

Answers: 1

Show answers

Another question on Physics

Physics, 21.06.2019 18:10

Scientists use laser range-finding to measure the distance to the moon with great accuracy. a brief laser pulse is fired at the moon, then the time interval is measured until the "echo" is seen by a telescope. a laser beam spreads out as it travels because it diffracts through a circular exit as it leaves the laser. in order for the reflected light to be bright enough to detect, the laser spot on the moon must be no more than 1.0 km in diameter. staying within this diameter is accomplished by using a special large-diameter laser. part a if λ = 540nm , what is the minimum diameter of the circular opening from which the laser beam emerges? the earth-moon distance is 384,000 km. express your answer to two significant figures and include the appropriate units.

Answers: 1

Answer

Physics, 21.06.2019 20:50

An airplane flies eastward and always accelerates at a constant rate. at one position along its path it has a velocity of 34.3 m/s, it then flies a further distance of 40100 m and afterwards its velocity is 47.5 m/s. find the airplane\'s acceleration and calculate how much time elapses while the airplane covers those 40100 m.

Answers: 1

Answer

Physics, 22.06.2019 13:10

1. the materials manager for a billiard ball maker must periodically place orders for resin, one of the raw materials used in producing billiard balls. she knows that manufacturing uses resin at a rate of 50 kilograms each day, and that it costs $.04 per day to carry a kilogram of resin in inventory. she also knows that the order costs for resin are $100 per order, and that the lead time for delivery is four (4) days.2. at what point should resin be reordered? a. 0 kilograms remainingb. 50 kilograms remainingc. 200 kilograms remainingd. 400 kilograms remaininge. 500 kilograms remaining3. if order size was 1,000 kilograms of resin, what would be the length of an order cycle? a. 0.05 daysb. 4 daysc. 16 daysd. 20 dayse. 50 days4. if the order size was 1,000 kilograms of resin, what would be the average inventory level? a. 50 kilogramsb. 200 kilogramsc. 500 kilogramsd. 800 kilogramse. 1,000 kilograms5. if the order size was 1,000 kilograms of resin, what would be the daily total inventory costs, excluding the cost of the resin? a. $5b. $10c. $20d. $25e. $40

Answers: 3

Answer

Physics, 23.06.2019 00:10

Consider a small frictionless puck perched at the top of a fixed sphere of radius r. if the puck is given a tiny nudge so that it begins to slide down, through what vertical height will it descend before it leaves the surface of the sphere? [hint: use conservation of energy to find the puck's speed as a func e conservation of energy to find the puck's speed as a function of its height at what value of this normal force does the puck leave the sphere? ] here on the puck.

Answers: 2

Answer

You know the right answer?

A skateboarder is trying to skate horizontally off a building and jump over a pool as shown! The poo...

Questions