The following data were obtained in an experiment using an immersion heater to determine the specific latent heat of vaporization of water. Mass of can and water at start of boiling=0.28kg

Mass of can and water at end of boiling= 0.26kg

Power of heater = 150 W

Time of heating = 5 minutes

(i) Using the data above, calculate the specific latent heat of vaporization of water, assuming negligible heat is lost to the surroundings.

A175 g lump of molten lead at its melting point (327 c) is placed into 55.0 g of water at 20.0 c. the specific heat of lead is 130.j/kg c and the hf of lead is 20,400 j/kg. when the lead and the water have reached equilibrium, what is the temperature of the mixture?

Ajet plane has a sound level of 120 db at a distance of 60 m. what is the q23. sound level at a distance of 6.0 km? (60)2 (6000)? om solution 80db db, hint: 16x assume ultrasound waves travel through the body of an animal at 1540 q24. m/s. if a 30,000 hz signal were reflected off a portion of a heart which was moving toward the source at 3 m/s, what frequency signal would return to the stationary source? solution 30.117hz

Athin plate moves between two parallel, horizontal, stationary flat surfaces at a constant velocity of v = 7.5 m/s. the two stationary surfaces are spaced 4 cm apart, and the medium between them is filled with oil whose viscosity is 0.9 n·s/m2. the part of the plate immersed in oil at any given time is 2 m long and 0.5 m wide. if the plate moves through the mid-plane between the surfaces, determine the force required to maintain this motion. what would your response be if the plate was 1 cm from the bottom surface (h2) and 3 cm from the top surface (h1)? if the plate moves through the mid-plane between the surfaces, the force required to maintain the motion will be n. if the plate was 1 cm from the bottom surface (h2) and 3 cm from the top (h1) surface, the force required to maintain the motion would be n.