One end of a light inextensible string is attached to a tool box of mass 2.5 kg which is lying on a horizontal table. The string passing over a smooth pulley and is tied at the other end to a bag of mass 1.4kg as shown in the diagram a. If the toolbox on the point of sliding, find the value for μ, the coefficient of friction.
b. Supposing the coefficient of friction between the tool boxe and the table is 0.20, calculate the acceleration of the system and the tension in the string gravity as 10 m per second square

Find the steady-state temperature at the center of the plate = /2, = /2) for sums of w from n=1 to n=19 (only odd values). find the value of n for which the change in /2, /2) is less than 1% from the value at the previous n. at this point, we consider the solution converged. does the value of the temperature at the center seem reasonable? in this part, the values of x and y are constant scalar values. you should produce a plot of the value of n on the horizontal and the estimate of the temperature at the center of the plate on the vertical. b. using the value of n (or larger) that resulted in convergence in part (a), create a contourf plot of the temperature distribution across the entire plate. use enough spatial subdivisions to create a useful plot. comment on the results. hint: you need to determine what “x” and “y” values to use to make your t matrix. i recommend using a different number of x and y values. use enough x and y values so that the plot is “smooth”.