7) A body of mass m, rests on a smooth inclined plane and is attached by a light string over a frictionless pulley to a mass
m, as shown in the diagram.
a) Reproduce the diagram in your answer book and label
the forces acting on the mass m.
b) If mass m, = 25.0 kg and m2 = 6.0 kg, calculate the
tension in the string.
(4 marks)
m.
ms
30°
U11
1
Doterm
anale that the path

most voltage drop calculators want the distance between the source and destination. then internally, they double it so both the source and return wires are calculated. but you need to know which distance the calculator uses so you're not half of what you should be or double what you should be.

most circuit breakers will not take a #6 directly, so the electrician will have to splice on a smaller pigtail. you also have to upsize the grounding wire when you upsized the ungrounded (hot) wire (see note in 250.122). this will preclude using most cable assemblies, as a cable with #6 copper will most likely only have a #10 grounding conductor. you need a #6 grounding conductor if the circuit is 20a. a #8 cable is no better, as it will have a #10 grounding conductor too. but most 20a breakers will take a #8 directly.

in your related post, you didn't say what type of load this is. if it is a light or heater, voltage drop won't be a big issue. if this is a motor, the current needs are huge at startup and the voltage drop can pose a problem. if this is a motor, knowing if the motor is under much load during startup will answer the voltage drop effect (a saw is easier to start than a compressor).

i would say the answer is food.

hope this !

the answer for apex is the lowest

first thing first of the answer is with technology. second thing second thing is that the big bang theory did not happened u see they say it did but what they dont realize is that like dinasures are still a round they might deny it but they and look at these 12 foot human skelteons they find lets see didnt the bible say something about giants. hope this peace.