Physics, 24.12.2021 14:00 DojaCat

Please answer it I will mark it brainliest

Answers: 2

Show answers

Answers

Answer from: tahlialafaye

Explanation:

1) If you spot something you think might be hazardous in your workplace, report it to your employer and safety rep straight away. Your employer should then decide what harm the hazard could cause and take action to eliminate, prevent or reduce that harm. Read more about risk assessments .

2) Complex hazards are understood as various combinations of sources of hazards that lead to the accident occurrences. ... The term "natural-technological" applies to both human-induced intensification of natural risks and any accidents in the technosphere triggered by natural processes or phenomena.

3)Risk Evaluation : To determine who may be harmed. Risk Control : Taking preventive measures to control the impact of risk.

In general, to do an assessment, you should:

Identify hazards.

Determine the likelihood of harm, such as an injury or illness occurring, and its severity. ...

Identify actions necessary to eliminate the hazard, or control the risk using the hierarchy of risk control methods.

Answer from: deaishaajennings123

A hazard is something that can cause harm, e.g. electricity, chemicals, working up a ladder, noise, a keyboard, a bully at work, stress, etc. A risk is the chance, high or low, that any hazard will actually cause somebody harm.

Risk Identification : It is a process of characterizing hazards. Risk Analysis : A process of determining the impact of risk. Risk Evaluation : To determine who may be harmed.

Answer from: Quest

the answer would most likely be c, because if it's a comical piece of information, it may likely not be true, if it's a site that allows anybody to edit the content, it could mean a five year old is typing the info, and if it's a tv show produced by a celeb, it may have a biased opinion.

Answer from: Quest

Wooden , walls ,doors ,support

Another question on Physics

Physics, 21.06.2019 19:40

Apackage of supplies is dropped from a plane, and one second later a second package is dropped. neglecting air resistance, the relative velocity of the 1st package viewed from the second will 56) a) increase. b) be constant. c) be zero. d) depend upon their weight. e) decrease

Answers: 1

Answer

Physics, 22.06.2019 05:30

Describe uniform velocity and variable velocity in short

Answers: 1

Answer

Physics, 22.06.2019 06:20

Clothing made of several thin layers of fabric with trapped air in between, often called ski clothing, is commonly used in cold climates because it is light, fashionable, and a very effective thermal insulator. so it is no surprise that such clothing has largely replaced thickand heavy old-fashioned coats. (a) consider a jacket made of five layers of 0.1-mm-thick synthetic fabric (k = 0.13 w/m·°c) with 1.5-mm-thick air space (k = 0.026 w/m·°c) between the layers. assuming the inner surface temperature of the jacket to be 28°c and the surface area to be 1.25 m2, determine the rate of heat loss through the jacket when the temperature of the outdoors is 0°c and the heat transfer coefficient at the outer surface is 25 w/m2·°c. (b) what would your response be if the jacket is made of a single layer of 0.5-mm-thick synthetic fabric? what should be the thickness of a wool fabric (k = 0.035 w/m·°c) if the person is to achieve the same level of thermal comfort wearing a thick wool coat instead of a five-layer ski jacket?

Answers: 1

Answer

Physics, 22.06.2019 11:30

1. a camcorder has a power rating of 19 watts. if the output voltage from its battery is 7 volts, what current does it use?answer units 2. a 1.5m wire carries a 6 a current when a potential difference of 57 v is applied. what is the resistance of the wire? yourunits 3. a clothes dryer uses about 2 amps of current from a 240 volt line. how much power does it use? yourunits 4.

Answers: 1

Answer

You know the right answer?

Please answer it I will mark it brainliest
...

Questions