subject
Physics, 28.12.2021 16:50 ijinaeiaujah8165

Focus Electric wires can be covered with a material that does not transmit electricity, such as rubber or plastic coating. This material is known as a(n) final exam

ansver
Answers: 2

Another question on Physics

question
Physics, 21.06.2019 18:20
An input force of 7 n is applied to a machine with a mechanical advantage of 1.75. what is the maximum the machine could lift? 12.25 n7n7.25 n26.2 n
Answers: 1
question
Physics, 22.06.2019 09:50
Gordon is going for a run through the park, but it is cold outside. the low outside temperature could affect his personal safety.
Answers: 1
question
Physics, 22.06.2019 22:00
The inside surface of a cylindrical-shaped cave of inner diameter 1.0 m is continuously covered with a very thin layer of water. the cave is very long and it is open on both ends. the water on the cave surface is at a constant temperature of 15.5 °c. the cave is constantly exposed to wind such that 15.5 °c air flows through the cave at 4.5 m/s. the kinematic viscosity of the air is 14.66 x 10-6 m2/s and the molecular diffusion coefficient of water vapor in the air is 0.239 x 10-4 m2/s. because the cave diameter is so large, the flow of wind down the length of the cave, in the x direction, can be treated like it is external flow and the cave surface can be approximated as flat where appropriate. calculate the x value, in a) the transition to turbulent flow occurs at rex meters, where the air flow transitions from laminar to turbulent along the inside surface of the cave b) calculate the x value, in meters, where the bulk steady state concentration of water vapor in the air flowing in the cave is 10% of the saturation concentration. assume the air at the surface of the water layer is 100% saturated with water vapor. assume the wind entering the cave contained no moisture before it entered the cave. take into account the transition from laminar to turbulent flow when solving part b
Answers: 1
question
Physics, 22.06.2019 23:00
As seen in a us weather map, the h (or high) and l (or low) symbols indicate regions where surface air pressures are high or low, respectively, compared to surrounding areas. an h is plotted where the air pressure is highest and an l is plotted where the air pressure is lowest. proceeding outward and away from the center of a high pressure system, the air pressure "
Answers: 1
You know the right answer?
Focus Electric wires can be covered with a material that does not transmit electricity, such as rubb...
Questions
question
Mathematics, 08.11.2020 09:50
question
Arts, 08.11.2020 09:50
question
Chemistry, 08.11.2020 09:50
question
Mathematics, 08.11.2020 09:50
question
Mathematics, 08.11.2020 09:50
Questions on the website: 13722367