From because when held inhands stmah 3.in an experiment to determine the density of Sand using a density bottle, the following measurements were recorded: Mass of empty of density bottle=43.2g Mass of density bottle full of water=66.4g Mass of density bottle with some sand =67.5g Mass of density bottle with sand, filled up with water=82.3g Use the above data to determine the: a) mass of the water that filled the bottle 1mks b) Volume of the water that filled the bottle. 2mk c) Volume of the density bottle Imk. d) Mass of sandlmk e) Mass of water that filled the space above the sand lmk • • • f) Volume of the sand 3mk Density of the sand

Which surface feature of the moon is characterized by mountainous areas? terrae craters maria regolith

Aperson stands on a platform, initially at rest, that can rotate freely without friction. the moment of inertia of the person plus the platform is ip. the person holds a spinning bicycle wheel with its axis horizontal. the wheel has moment of inertia iw and angular velocity ωw. take the ωw direction counterclockwise when viewed from above. part a what will be the angular velocity ωp of the platform if the person moves the axis of the wheel so that it points vertically upward?

The ultracentrifuge is an important tool for separating and analyzing proteins. because of the enormous centripetal accelerations, the centrifuge must be carefully balanced, with each sample matched by a sample of identical mass on the opposite side. any difference in the masses of opposing samples creates a net force on the shaft of the rotor, potentially leading to a catastrophic failure of the apparatus. suppose a scientist makes a slight error in sample preparation and one sample has a mass 10 mg larger than the opposing sample. if the samples are 12 cm from the axis of the rotor and the ultracentrifuge spins at 70,000 rpm, what is the magnitude of the net force on the rotor due to the unbalanced samples? ( be thorough on your answer)