subject
Physics, 28.01.2022 05:30 edwrads4044

Find the efficiency of a machine that does 900 J of work if the input work is 1,200 J. You must show all your work to receive credit. A wheelbarrow can be used to help lift a load and push the load across a distance. The fulcrum is located at the opposite end where the effort is applied and the load (whatever is in the wheelbarrow) is in the middle of the fulcrum and effort.

What kind of lever is the wheelbarrow.

A. Class 1 Lever - The fulcrum is located between the effort and the load.
B. Class 2 Lever - The closer the load is placed to the fulcrum, the less effort needed to lift the load.
C. Class 3 Lever - The effort lies between the load and the fulcrum.

How does a machine make work easier? A machine makes work easier by changing. Choose the three statements that apply.

the direction of a force
the amount of force applied
the time needed to do the work
the amount of work done
the distance over which a force is applied

Adam lifts a book from the floor, carries it across the room, and places it on a high shelf. When is Adam doing work on the book?

W= FD
Work = Force x Distance
A. He does work from the moment he touches the book until he lets it go.
B. He does work only while he carries the book across the room.
C. He does work as he picks up the book and as he lifts it to the shelf.
D. He does work on the book at no time during this process.

Two girls each carry a box up to the fourth floor of a building. The total mass of each girl and the box she is carrying is the same. Rachel makes the trip in 35 seconds while Madison takes 50 seconds.

Which of the following statements best describes this task?
A. Madison does more total work than Rachel.
B. Rachel has greater power output than Madison.
C. Rachel does more total work than Madison.
D, Madison has a greater power output than Rachel.

please don't steal my points if you can't answer it thx for trying


Find the efficiency of a machine that does 900 J of work if the input work is 1,200 J. You must sho

ansver
Answers: 1

Another question on Physics

question
Physics, 21.06.2019 22:00
1. consider the case in which air fills air shocks on a truck trailer. the pressure in the shocks is 2 mpa. the temperature is 300 k. the diameter of the shock piston is 10 cm and the initial length of the cylindrical cavity containing the compressed air is 40 cm. a. the truck is gradually loaded over a period of a day in a static setting. the temperature is held constant for the atmosphere and thus for the gas shock. calculate the compressibility of the air in the shock for this condition when the truck is initially being loaded. b. if the shocks were loaded in a dynamic setting by driving over bumps, what would be the compressibility? state your assumption. c. what is the initial load on the shock if the shock is in an atmospheric 100 kpa? d. if the shock is compressed using the process described in part a, and the air shock compressed air cavity length decreases to 20 cm, what is the additional load applied to the shock?
Answers: 2
question
Physics, 22.06.2019 09:30
For this car, predict the shape of a graph that shows distance (x) versus time (t). note that time is the independent variable and will be on the bottom axis. need asap
Answers: 1
question
Physics, 22.06.2019 19:30
A47.2 g block of copper whose temperature is 480 k is placed in an insulating box with a 91.8 g block of lead whose temperature is 200 k. (a) what is the equilibrium temperature of the two-block system? (b) what is the change in the internal energy of the two-block system between the initial state and the equilibrium state? (c) what is the change in the entropy of the two-block system? the heat capacities of copper and lead are 386 j/kg·k and 128 j/kg·k, respectively.
Answers: 1
question
Physics, 22.06.2019 23:00
As seen in a us weather map, the h (or high) and l (or low) symbols indicate regions where surface air pressures are high or low, respectively, compared to surrounding areas. an h is plotted where the air pressure is highest and an l is plotted where the air pressure is lowest. proceeding outward and away from the center of a high pressure system, the air pressure "
Answers: 1
You know the right answer?
Find the efficiency of a machine that does 900 J of work if the input work is 1,200 J. You must show...
Questions
question
Biology, 17.12.2020 22:50
question
Physics, 17.12.2020 22:50
question
Mathematics, 17.12.2020 22:50
question
Mathematics, 17.12.2020 22:50
question
Biology, 17.12.2020 22:50
Questions on the website: 13722363