What is the change in temperature for the water in the calorimeter after the aluminum wire was added?

Explain what makes a passenger in a turning car slide toward the door. critical thinking

Steam is generated in a boiler of a cogeneration plant at 10 mpa and 450°c at a steady rate of 5 kg/s. in normal operation, steam expands in a turbine to a pressure of 0.5 mpa and is then routed to the process heater, where it supplies the process heat. steam leaves the process heater as a saturated liquid and is pumped to the boiler pressure. in this mode, no steam passes through a condenser, which operates at 20 kpa. (a) determine the power produced in the turbine and the rate at which process heat is supplied in this mode. (b) determine the power produced in the turbine and the rate of process heat supplied if only 60 percent of the steam is routed to the process heater and the remainder is expanded to the condenser pressure. (3.32 mw; 9.69 mw; 4.25 mw; 5.82 mw)

An air standard cycle with variable specific heats is executed in a closed system and is composed of the following four processes. 1-2 isentropic compression 100 kpa and 22°c to 600 kpa 2-3 v=constant heat addition to 1500 k 3-4 isentropic expansion to 100 kpa 4-1 p=constant heat rejection to initial state (a) show the cycle on p-v and t-s s (b) calculate the net work output per unit mass (409 kj/kg) (c) determine the thermal efficiency (47.9%)