A616 g block is released from rest at height h0 above a vertical spring with spring constant k = 540 n/m and negligible mass. the block sticks to the spring and momentarily stops after compressing the spring 23.3 cm. how much work is done (a) by the block on the spring and (b) by the spring on the block? (c) what is the value of h0? (d) if the block were released from height 2h0 above the spring, what would be the maximum compression of the spring?

Suppose you were asked to find the torque about point p due to the normal force n in terms of given quantities. which method of finding the torque would be the easiest to use?

1point) a skydiver weighing 130 lb (including equipment) falls vertically downward from an altitude of 14,000 ft and opens the parachute after 20 s of free fall. assume that the force of air resistance, which is directed opposite to the velocity, is of magnitude 0.85|v|0.85|v| when the parachute is closed and is of magnitude 17|v|17|v| when the parachute is open, where the velocity vv is measured in ft/s. assume that acceleration due to gravity has magnitude 32 ft/s/s; remember that weight is the product of mass and gravitational acceleration. find the speed of the skydiver when the parachute opens. speed is 150.6121788 ft/s find the skydiver's height when the parachute opens. height is 2338.98591 ft find the limiting velocity vlvl after the parachute opens. (think about whether this should be positive or negative.) vl=vl= 7.647 ft/s

Aball tossed vertically upward from the ground next to a building passes the bottom of a window 1.8 s after being tossed and passes the top of the window 0.20 s later. the window is 2.0 m high from top to bottom. what was the ball's initial velocity? the unit vector j^ is directed upward. how far is the bottom of the window from the launch position? how high does the ball rise above the launch position?