Which of the following is the best definition of constructive interference? a. the subtraction of one wave from another b. the addition of one wave to another c. the blocking of one wave by another d. the cancelling of one wave by another

What is the frequency of a light wave with a wavelength of 620nm

Steam is generated in a boiler of a cogeneration plant at 10 mpa and 450°c at a steady rate of 5 kg/s. in normal operation, steam expands in a turbine to a pressure of 0.5 mpa and is then routed to the process heater, where it supplies the process heat. steam leaves the process heater as a saturated liquid and is pumped to the boiler pressure. in this mode, no steam passes through a condenser, which operates at 20 kpa. (a) determine the power produced in the turbine and the rate at which process heat is supplied in this mode. (b) determine the power produced in the turbine and the rate of process heat supplied if only 60 percent of the steam is routed to the process heater and the remainder is expanded to the condenser pressure. (3.32 mw; 9.69 mw; 4.25 mw; 5.82 mw)

Afeather of mass 0.001 kg falls from a height of 2 m. under realistic conditions, it experiences air resistance. based on what you know about friction, what can you say about the kinetic energy of the feather as it reaches the ground? acceleration due to gravity is g = 9.8 m/s2. a. ke < 0.0196 j b. ke = 00196 j c. je = 0 j d. ke > 0.0196 j