To properly set the heat anticipator, the must determine what the current flow is through the heating control circuit when the furnace is operating in a steady state condition.

Heating Technician

Explanation:

Question

To properly set the heat anticipator, the heating technician must determine what the current flow is through the heating control circuit when the furnace is operating in a steady state condition.

thermostat

Explanation: firstly, a heat anticipator is an electrical resistor device mounted in the centre of so many mechanical thermostats.

It fine tunes the point at which the thermostat turns off the furnace burners.

thermostat is a component which senses the temperature of a physical system and performs actions so that the system's temperature is maintained near a desired setpoint.

It helps to heats or cools to a setpoint temperature,thermostat operates as a "closed loop" control device, as it seeks to reduce the error between the desired and measured temperatures.

Perhaps the most common example of purely mechanical thermostat technology in use today is the internal combustion engine cooling system thermostat, used to maintain the engine near its optimum operating temperature by regulating the flow of coolant to an air-cooled radiator.

The thermostat allows the temperature to be maintained within given limits. It cuts off the supply of heat when the temperature is high and also restores it back when the temperature falls back to its desired level

answer; sutherland-differential association;