You use glade to make a user interface and write c++ code that loadsit, displays it, and uses it. it works perfectly on your computer. yougive the executable to your buddy who is running the same os thatyou do. he complains that your code throws an error when startingup. what likely happened?

You are working as a security analyst in a company xyz that owns the whole subnet range of 23.0.0.0/8 and 192.168.0.0/8. while monitoring the data, you find a high number of outbound connections. you see that ip's owned by xyz (internal) and private ip's are communicating to a single public ip. therefore, the internal ip's are sending data to the public ip. after further analysis, you find out that this public ip is a blacklisted ip, and the internal communicating devices are compromised. what kind of attack does the above scenario depict?

Which of the following commands is more recommended while creating a bot?

You need to design a circuit that implements the functions in the following table: s0 s1 function0 0 a + 10 1 a – b1 0 a + b1 1 a – 1s0 and s1 are 1-bit control inputs to select the function of the circuit. inputs a and b are 4-bitnumbers in 2s complement form. the output is also a 4-bit number in 2s complement form.you are allowed to use only one ttl 7483 4-bit adder to implement all the functions. but anynumber of other components (except the adder) can be used.hint: design a combinational logic circuit to modify the input b and the “carry input” of theadder depending on the control inputs s0 and s1.important: lab grade will depend on the working of the circuit & will be checked of by your labinstructor.1. is the output valid for the following input combinations: a. s0 = 0, s1 = 0, a = 7, b = 3? b. s0 = 0, s1 = 1, a = 7, b = 3? c. s0 = 1, s1 = 0, a = -4, b = -5? d. s0 = 1, s1 = 1, a = -8, b = 6? 2. what is the range of inputs (for both a and b) that will produce the valid output for all the functions?