If you lived during the third generation of computers and were considered a technician able to repair those computers, what would be your area of expertise

Write a program that inserts the digits of an integer into an array in originalorderfollowed by reverse order. first, promptthe user to enter a positive integer(> 0). determine the number of digits of the integer. create a dynamically allocated integer arrayof a size twice the number of digits.now insert the digits in original order which will occupy half of the array. then, insert the digits in reverse order.finally, output thedigits in thearray.use at least two functions to organize your program.

Write a function called checkfactor that takes two arrays of positive numbers, firstnumberrow and secondnumberrow. checkfactor checks if the first entry in firstnumberrow is divisible by the first entry in secondnumberrow, and performs the same operation on the next array elements until all entries have been checked. all the numbers are positive and the number of entries in the arrays are the same. the function should return the identified divisible numbers in two row arrays named firstdivisible and seconddivisible.restrictions: branches or loops should not be used. the code must use the internal mod and logical functions.hint: the mod function should be used to determine if two numbers are divisible. ex: for num1 and num2 if mod(num1,num2) is 0, then the two numbers are divisible.this is matlab

Write a program in plp assembly that counts up by one starting from zero (or one) inside a loop and writes this value to the leds every time the value is increased. the memory address of the leds is 0xf0200000. the table below shows the meaning and an example usage of the instructions covered in the video, plp instructions for project 1. instruction example usage meaning load immediate li $t0, 8 register $t0 is set to the value, 8. store word sw $t2, 0($t1) the value in register $t1 is used as the memory address. the value in register $t2 is copied into this memory address. add addiu $t4, $t3, 29 register $t4 is assigned the sum of 29 and the value in register $t3. jump j your_label_name the program jumps to the line following the label, "your_label_name: ". label your label name: defines a label called "your_label_name: " that can be jumped to