Engineering, 26.07.2019 17:20 aidy7267
Afixture will be designed to hold a part in a vise that will be produced in mass quantities. the rner closest to the mill oper a suitable fixture. the sketch should depict an appropriate feature reference frame and ergonomic clamps. if easier for you, use catia to produce the sketch. note: this is an open design question. apply the fixture design concepts in lec 6a qualitatively, but explain the motivation for your different choices.
Answers: 1
Engineering, 04.07.2019 18:10
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
Engineering, 04.07.2019 18:10
Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery
Answers: 2
Engineering, 04.07.2019 19:10
Asteam is contained in a rigid tank with a volume of 1 m3. initially, the pressure and temperature are 7 bar and 500 oc, respectively. the temperature drops due to cooling process. determine: (1) the temperature at which condensation begins in °c, (2) the fraction of the total mass that has condensed when the pressure decreased to 0.5 bar. (3) the volume in m3 occupied by saturated liquid at the final state?
Answers: 3
Afixture will be designed to hold a part in a vise that will be produced in mass quantities. the rne...
History, 26.12.2021 21:30
English, 26.12.2021 21:40
English, 26.12.2021 21:40
History, 26.12.2021 21:40
English, 26.12.2021 21:40
English, 26.12.2021 21:50
Mathematics, 26.12.2021 21:50
Mathematics, 26.12.2021 21:50
Mathematics, 26.12.2021 21:50
Social Studies, 26.12.2021 21:50