subject
Engineering, 07.08.2019 18:30 sustaitaj2022

In a 3x3m square flat horizontal solar collector the outside of the glass cover of the collector is at 40 c and the ambient air is at 10 c with wind parallel to the surface of the collector at velocity of 10m/s. find: a. the rate of heat loss by convection from the glass b. the friction coefficient, cf on the glass c. if the wind dies down find the rate of heat transfer from the glass assuming its outside temperature remains the same.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false
Answers: 1
question
Engineering, 04.07.2019 19:10
What is a monomer? how do they form a ploymer from the view point of chemical bonding?
Answers: 1
question
Engineering, 04.07.2019 19:10
Afoot bridge is made as a simple deck, 4 m long, with a cross section 2 m (wide) and 20 cm thick, and made of wood. the deck is supported at the two ends. the maximum load allowable on the bridge is 10 tons, provided it is uniformly distributed on the deck. to sense this load, a strain gauge is placed at the center of the bridge and its resistance is monitored. if the sensor has a nominal resistance of 350 s2 and a gauge factor of 3.6, what is the reading of the strain gauge at maximum load? the modulus of elasticity for the wood used in the construction is 10 gpa.
Answers: 2
question
Engineering, 04.07.2019 19:10
For a process taking place in a closed system containing gas, the volume and pressure relationship is pvi-constant. -1.5 bar, the process starts with initial conditions, pi = =0.03 m3 and ends with final volume, v2-0.05 m3 determine the work done by the gas.
Answers: 2
You know the right answer?
In a 3x3m square flat horizontal solar collector the outside of the glass cover of the collector is...
Questions
question
Mathematics, 15.06.2021 01:00
question
Mathematics, 15.06.2021 01:00
Questions on the website: 13722363