subject
Engineering, 21.08.2019 02:10 alphaaz23415

Apipeline leads from one reservoir to another, which has its water surface 10 m lower. for a discharge of 1.0 m3/s, determine the losses in meters and in kw.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
question
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
question
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
question
Engineering, 04.07.2019 19:20
Heat transfer by is the fastest mode of heat transfer that requires no intervening medium. a)-conduction b)-convection c)-radiation d)-conduction and convection
Answers: 1
You know the right answer?
Apipeline leads from one reservoir to another, which has its water surface 10 m lower. for a dischar...
Questions
question
Mathematics, 09.09.2021 23:50
question
English, 09.09.2021 23:50
question
Mathematics, 09.09.2021 23:50
question
Mathematics, 09.09.2021 23:50
question
Mathematics, 09.09.2021 23:50
question
Mathematics, 09.09.2021 23:50
question
Computers and Technology, 09.09.2021 23:50
Questions on the website: 13722367