Engineering, 30.08.2019 05:30 asmita9876
Acaliper brake is required for the front wheels of a passenger car with a braking capacity of 500 nm for each brake. preliminary design estimates have set the brake geometry as ri = 110 mm' and 0 = 43°. pads with a coefficient of friction of 0.38 have been selected. each pad is actuated by means of a hydraulic cylinder of nominal diameter 25.4 mm. determine: 3.1 the required actuating force, the average and the maximum contact pressures, the required hydraulic pressure for brake actuation
Answers: 2
Another question on Engineering
Engineering, 03.07.2019 23:20
Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct
Answers: 3
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
Engineering, 04.07.2019 18:10
The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false
Answers: 1
Engineering, 04.07.2019 18:20
Water vapor initially at 10 bar and 400 °c is contained within a piston-cylinder assembly. the water lost heat to the surrounding according to isochoric (iso-volumetric) process until its temperature is 150 °c. the water is then condensed isothermally to saturated liquid. for the water as a system, calculate the work in kj/kg
Answers: 2
You know the right answer?
Acaliper brake is required for the front wheels of a passenger car with a braking capacity of 500 nm...
Questions
Mathematics, 09.08.2021 21:50
Geography, 09.08.2021 21:50
