subject
Engineering, 20.09.2019 01:00 MalikaJones

Your engineering firm has been hired by the local electric company to construct them a wind farm on a square plot of 8567 hectares of land. the rotational diameter of the turbine blades is 50 meters. the distance between turbines from rotational diameter to rotational diameter in the same row must be 2500 feet and the distance between turbine rows must be 4000 feet in order for the turbines to operate at maximum efficiency. how many turbines will be in each row and how many rows of turbines will there be in total? remember, you can’t have a fraction of a turbine.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 23:20
Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct
Answers: 3
question
Engineering, 04.07.2019 18:10
Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.
Answers: 1
question
Engineering, 04.07.2019 18:10
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
question
Engineering, 04.07.2019 18:20
Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]
Answers: 1
You know the right answer?
Your engineering firm has been hired by the local electric company to construct them a wind farm on...
Questions
question
Mathematics, 17.03.2022 01:00
question
Mathematics, 17.03.2022 01:00
Questions on the website: 13722367