subject
Engineering, 23.09.2019 16:20 katieabby9525

2. you are considering building a commercial pv solar power system to produce 50,000 kwh of electricity each year. the system will be composed of monocrystalline silicon panels with a cell efficiency of 18.7%. each panel will produce 200 w at full power and costs $175. the balance of system (bos) cost including installation of the panels and the necessary hardware and electrical components (wiring, inverter, and battery bank) and installation is $35,000. the system is estimated to have a capacity factor of 12% and a 25 year life expectancy. assume an operations and maintenance cost of $0.005/kwh. the annual discount rate is 5.5%. a. how many panels are required for the system? b. what is the capital cost (investment cost) of the system ($)? c. what is the annual cost for the fixed capital of the system ($/y)? d. what is the levelized cost of electricity for the pv system ($/kwh)?

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
question
Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
question
Engineering, 04.07.2019 18:10
Condition monitoring is a major component of. (clo4) a)- predictive maintenance. b)-preventive maintenance c)-proactive maintenance d)-reactive maintenance.
Answers: 1
question
Engineering, 04.07.2019 18:20
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
You know the right answer?
2. you are considering building a commercial pv solar power system to produce 50,000 kwh of electric...
Questions
question
Mathematics, 25.06.2019 12:30
Questions on the website: 13722367