subject
Engineering, 01.10.2019 05:00 bsheepicornozj0gc

Question 3 (6 points) a problem of practical concern which was considered by newton and a number of other pioneers of calculus was the volume of a wine barrel. in this question, we will instead consider the related question of how much work is needed to pump wine from a barrel. suppose we have a barrel, 4 feet tall, which is positioned with its base at y = −2 and its top at y = 2. suppose in addition that the radius of the circular slice of the barrel at height y is 2 − y 2 8 . how much work is needed to pump a full barrel of wine out a spout in the top of the barrel? (a) (3 points) set up an integral to compute the necessary work. you may use g to denote the acceleration due to gravity and d to denote the density of wine.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
question
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
question
Engineering, 04.07.2019 18:10
What are the two (02) benefits, which may result from a successful implementation of preventive maintenance (pm) program in an organization? (clo3)a)- lean manufacturing b)-overlapping responsibilities c)-the planner is not qualified d)-accurate contractor information e)-reduction in equipment redundancies f)-accurate stores information
Answers: 3
question
Engineering, 04.07.2019 18:20
Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis
Answers: 1
You know the right answer?
Question 3 (6 points) a problem of practical concern which was considered by newton and a number of...
Questions
Questions on the website: 13722363