subject
Engineering, 05.10.2019 12:00 madiiiiiii69

Akilogram of jet fuel releases approximately 43,000,000 j of (thermal) energy when combined with air and combusted. current state of the art battery technology can store approximately 200 w-hr of electricity. a. calculate the mass of a battery pack required to replace the energy content of a kilogram of jet fuel on a 1: 1 basis (even though one is chemical potential energy and the other is electrical potential energy). b. the boeing 737 holds approximately 60,000 lbs of fuel at maximum takeoff fuel load (about 1/3 the total takeoff weight). what would be the mass of the battery pack be to replace the fuel on the fully loaded 737 on an energy equivalent basis? c. if a turbofan can convert 30 % of the chemical potential energy in to thrust power and electric motors can convert 90% of the stored electrical energy into thrust, what would be the ratio of exergy extracted from the fuel vs the exergy extracted from the battery?

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79
Answers: 1
question
Engineering, 04.07.2019 18:10
The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false
Answers: 1
question
Engineering, 04.07.2019 18:10
Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)
Answers: 1
question
Engineering, 04.07.2019 18:20
Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]
Answers: 1
You know the right answer?
Akilogram of jet fuel releases approximately 43,000,000 j of (thermal) energy when combined with air...
Questions
question
English, 11.09.2019 01:10
Questions on the website: 13722363