subject
Engineering, 12.11.2019 05:31 tiffxnnyyy

Acenter-cracked panel with an initial crack length of 0.010 mm is subjected to a tensile cyclic stress between 25 and 125 mpa for 35 cycles. the panel is then subjected to a tensile cycle stress between 0 and 250 mpa. how many of the larger stress amplitude cycles can be sustained before failure? the material has a fracture toughness of 25 mpa√m and material constants n = 3.1 and c = 1.8 x 10-10 for these units.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
question
Engineering, 04.07.2019 18:10
The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false
Answers: 1
question
Engineering, 04.07.2019 18:10
Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false
Answers: 3
question
Engineering, 04.07.2019 18:10
Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i.d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.
Answers: 3
You know the right answer?
Acenter-cracked panel with an initial crack length of 0.010 mm is subjected to a tensile cyclic stre...
Questions
question
SAT, 03.05.2021 22:00
question
English, 03.05.2021 22:00
question
Mathematics, 03.05.2021 22:10
question
Mathematics, 03.05.2021 22:10
question
Physics, 03.05.2021 22:10
Questions on the website: 13722367