Engineering, 16.11.2019 01:31 poptropic9207
Heat transfer for parallel flow over a flat plate with an extremely rough surface was found to follow a mathematical model of the form = 0.04 . where nux is the local value of the nusselt number at a location x measured from the leading edge of the plate. obtain an expression for the ratio of the average convection coefficient to the local convection coefficient.
Answers: 1
Another question on Engineering
Engineering, 03.07.2019 14:10
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
Engineering, 04.07.2019 18:10
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
Engineering, 04.07.2019 18:10
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
You know the right answer?
Heat transfer for parallel flow over a flat plate with an extremely rough surface was found to follo...
Questions
Social Studies, 24.04.2020 23:24
Chemistry, 24.04.2020 23:24
Biology, 24.04.2020 23:24
English, 24.04.2020 23:24
