subject
Engineering, 22.11.2019 05:31 Nathaliasmiles

Amedium containing nutrient x in a 1000 liter reactor is sterilized. in the medium, you find an amount of contaminant microbe cell of 106 /l.
for the sterilization of this microbe, e0d=50 kcal/mol, and α=1028 min-1. the initial concentration of nutrient is 20 mg/l. the sterilization is performed at 121 oc. if you perform a sterilization time of 15 min, what is the unsuccessful fermentation probability? if under this condition, 20% nutrient will be degraded, calculate the degradation activation energy for nutrient x. assume α=106 min-1 for nutrient deactivation and r=1.987 cal/(mol k)

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
question
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
question
Engineering, 04.07.2019 18:20
Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k
Answers: 3
question
Engineering, 04.07.2019 19:10
What is a monomer? how do they form a ploymer from the view point of chemical bonding?
Answers: 1
You know the right answer?
Amedium containing nutrient x in a 1000 liter reactor is sterilized. in the medium, you find an amou...
Questions
question
Mathematics, 25.03.2020 05:07
Questions on the website: 13722361