Engineering, 28.11.2019 00:31 SumayahAminaAnsari
In the final stages of production, a pharmaceutical is sterilized by heating it from 25 to 75 degree c as it moves at 0.2 m/s through a straight thin-walled stainless steel tube of 12.7-mm diameter. a uniform heat flux is maintained by an electric resistance heater wrapped around the outer surface of the tube. if the tube is 10 m long, what is the required heat flux? if fluid enters the tube with a fully developed velocity profile and a uniform temperature profile. what is the surface temperature at the tube exit and at a distance of 0.5 m from the entrance? fluid properties may be approximated as p = 1000 kg/m, c = 4000 j/kg. k. m = 2 x 10^-3 kg/s. m, k = 0.8 w/m. k, and pr = 10. provide step-by-step work and a final answer. i will award points immediately.
Answers: 3
Another question on Engineering
Engineering, 03.07.2019 14:10
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
Engineering, 04.07.2019 18:10
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
Engineering, 04.07.2019 18:10
Carbon dioxide gas expands isotherm a turbine from 1 mpa, 500 k at 200 kpa. assuming the ideal gas model and neglecting the kinetic and potential energies, determine the change in entropy, heat transfer and work for each kilogram of co2.
Answers: 2
You know the right answer?
In the final stages of production, a pharmaceutical is sterilized by heating it from 25 to 75 degree...
Questions
