Engineering, 03.12.2019 02:31 ryantrajean7
Consider a square flat plate at zero incidence angle to a low-speed incompressible flow. the length of each side is 4 m. assume that the transition reynolds number is 5 × 105 and that the free-stream properties are those at standard sea level. calculate the friction drag on the flat plate when the free-stream velocity is
(a) 20 m/s and when it is
(b) 40 m/s.
(c) assuming that the friction drag, df, varies with velocity as , calculate the value of the exponent n based on the answers from (a) and (b). how close does n come to 2? that is, how close is the friction drag to obeying the velocity squared law?
Answers: 2
Another question on Engineering
Engineering, 03.07.2019 19:30
When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line
Answers: 3
Engineering, 04.07.2019 16:10
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
Engineering, 04.07.2019 18:10
Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k
Answers: 2
Engineering, 04.07.2019 18:10
Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery
Answers: 2
You know the right answer?
Consider a square flat plate at zero incidence angle to a low-speed incompressible flow. the length...
Questions
Social Studies, 07.11.2019 22:31
