Engineering, 09.12.2019 23:31 gbrightwell

Aspace is maintained at 75°f db and 50% rh. the return air has a sensible heat load of 100,000 btu/hr and a latent heat load of 40,000 btu/hr. the total outdoor air load is 80,000 btu/hr. the air supplied to the space is 55°f db and 90% rh. neglect the fan heat and heat gain from the duct system. with a temperature rise of chilled water across the cooling coil of 12°f, the rate of water flow (gpm) is most nearly: a. 15 b. 20 c c. 29 d. 35

Answers: 2

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented

Answers: 2

Answer

You know the right answer?

Aspace is maintained at 75°f db and 50% rh. the return air has a sensible heat load of 100,000 btu/h...

Questions