Engineering, 14.12.2019 05:31 arnold2619

Acompletely mixed activated-sludge plant is being designed for a wastewater flow of 5.0 mgd. the soluble bod concentration of the influent to the aeration basin is 200 mg/l. the effluent soluble bod requirement is 10 mg/l. the mean cell residence time is to be 8.0 days at an mlss concentration of 2500 mg/l. from pilot plant data, y = 0.6 lb vss/lb bod, kd = 0.06 day–1 , and 80% of the mlss are vss. calculate:

a) the volume of the aeration basin, in gals.
b) the dry mass of excess solids in the waste sludge in lb/day.
c) the aeration period, q in hours.
d) food-to-microorganism ratio, f/m.
e) bod loading, lb/day-1000 ft3 .

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater

Answers: 3

Answer

Engineering, 04.07.2019 18:10

The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false

Answers: 1

Answer

Engineering, 04.07.2019 18:10

The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)

Answers: 1

Answer

You know the right answer?

Acompletely mixed activated-sludge plant is being designed for a wastewater flow of 5.0 mgd. the sol...

Questions