subject
Engineering, 17.12.2019 22:31 shawnaelvaughns

Butane gas (c4h10) is burned with 20% excess air in a combustor. the temperature and pressure of the intake air and fuel are 400k and 101 kpa respectively. the temperature of the exhaust is 1600k and the total mass of fuel burned is 65kg. write out the balanced equation, determine the enthalpy of the products and reactants, and determine the heat transfer from the combustor. the water in the exhaust is a vapor. balanced equation: enthalpy of reactants hreactants hfuel hoxygen hnitrogen enthalpy of products hproducts - _ h. h. h. heat transfer q- kj

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
question
Engineering, 04.07.2019 18:20
Prove the equivalence between the two statements of the 2nd law of thermodynamics (i.e., a violation of one statement leads to the violatio the other statement)
Answers: 2
question
Engineering, 04.07.2019 19:10
For a process taking place in a closed system containing gas, the volume and pressure relationship is pvi-constant. -1.5 bar, the process starts with initial conditions, pi = =0.03 m3 and ends with final volume, v2-0.05 m3 determine the work done by the gas.
Answers: 2
question
Engineering, 04.07.2019 19:10
Agas contained within a piston-cylinder assembly e end nation about same energy states, 1 and 2, where pi 10 bar, v undergoes two processes, a and b, between the sam 0.1 m3, ui-400 kj and p2 1 bar, v2 1.0 m2, u2 200 kj: process a: process from 1 to 2 during which the pressure- volume relation is pv constant process b: constant-volume process from state 1 to a pressure of 2 bar, followed by a linear pressure-volume process to +20 0 state 2 kinetic and potential energy effects can be ignored. for each of the processes a and b, (a) sketch the process on p-v coordinates, (b) evaluate the work, in kj, and (c) evaluate process the heat transfer, in kj
Answers: 2
You know the right answer?
Butane gas (c4h10) is burned with 20% excess air in a combustor. the temperature and pressure of the...
Questions
question
Mathematics, 08.08.2019 05:10
Questions on the website: 13722367