subject
Engineering, 12.02.2020 01:34 nallwly

A). If the rat were twice as long (20 cm), how many square centimeters of skin would be heating each cubic centimeter of body? (Hint: this is the surface-to-volume ratio.)

cm2 skin per cm3 body

b)Absorbed Radiation = (exposed area) × (solar radiation) × (absorption)
In the heat of the day in the Sonoran desert, the Sun produces around 0.1 watts / cm2. Assume 1/2 the skin of the k-rat is exposed to solar radiation (recall total k-rat skin area is 315 cm2), and that the k-rat absorbs 50% of that radiation (absorption = 0.5). Using those numbers, answer the following question.
Calculate the heat gain from solar radiation and type this value into the Absorbed Radiation box on the right.

c)Assuming the k-rat has a mass of 30 grams, calculate how much metabolic heat it generates at rest.

d) conduction rate

e) the ground were at 303 K, how much heat would move into the k-rat by conduction

f) If the kangaroo rat were to lose that heat by water loss (the only mechanism left in the heat balance equation), how much water (in ml) would it need to lose every hour

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
question
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
question
Engineering, 04.07.2019 18:10
The higher the astm grain size number, the finer the gran is. a)-true b)-false
Answers: 2
question
Engineering, 04.07.2019 18:10
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
You know the right answer?
A). If the rat were twice as long (20 cm), how many square centimeters of skin would be heating each...
Questions
question
Mathematics, 02.11.2019 19:31
question
Mathematics, 02.11.2019 19:31
Questions on the website: 13722363